Product Detail

Reflex Racing's all-new AWD Flat Dish wheel marks their first venture into the AWD segment. Building on the success of the 2WD Speed Dish, Reflex Racing applied their experience to enhance performance, reliability, and affordability for AWD wheels. The front and rear wheels feature slightly different outer sidewall heights to better balance the car's performance and allow the use of their low profile tires on both ends, without the need for truing in most conditions.

Much like the 2WD versions, these wheels are crafted from Fiber Reinforced Nylon, which is Acetone safe. This makes them not only affordable but also reusable. The material ensures better tire bonding, effectively eliminating the issue of unglued tires, and allows the use of smaller tires on AWD cars, improving both acceleration and cornering speed.

For optimal setup, Reflex Racing recommends starting with their 40-degree front tire, fully glued on the outer sidewall, and the Low Profile 30-degree, 11mm tires in the rear, also fully glued. These wheels are also compatible with the RX608 Double Decimal Wheel Plate Set.

Note: For the Giulia, these wheels make the car about 79mm wide in the front and 78mm in the rear. Similar to 1/10 scale touring cars, having a slightly wider front on an AWD car provides more stability, better on-power steering, and less roll-over risk. While the plates are compatible, most bodies aren’t wide enough to accommodate them. However, thanks to the smaller tires and taller front sidewall, usually, only the front sidewall glue is needed. On the Atomic BZ3, the car measures around 75mm in the front and 74mm in the rear.

Contents